Mark Maker Pharma Engineering

The Mark Maker Pharma's advanced high efficiency automated tablet coating machine is mainly used in pharmaceutical and food industries and confirming to the requirement of cGMP. It is a high efficiency, energy saving, safe and clean equipment for film and sugar coating of tablets, Pills and candies with organic film, aqueous coating and sugar film etc.

Other Detail:-

Automatic Tablet Coater Is Designed For The Application Of Film Coating with an organic solvent, Enteric Coating and aqueous coating, Sugar Coating.

Working Principle :
The tablet to be coated makes a continuous complicated orbital motion the closed rotating Drum under the action of a streamline of Baffles. During the motion coating medium automatically sprays according to the technological process and rational technological parameters, at the same time hot filtered air supplied under a negative pressure. The hot air penetrates through the tablets core layers and is discharged from the bottom of the layers, so that the coating medium sprayed on the surface of the tablet cores will dry rapidly and evenly, thus forming a solid and smooth surface film on a tablet. The whole process is finished under the automatic by PLC Controls with Touchscreen Interface.

Additional Information:

• Item Code: MMPECOATER
• Production Capacity: 0.15 Gram to 12 Kg
• Delivery Time: 6 to 8 Weeks

Salient Features :

• Design is cGMP Current Good Manufacturing Practices Compiance.
• All Contact parts SS316 & non contact part SS304.
• Fully automatic film & sugar coating process by PLCcontrols with HMI touch screen.
• Complete separation of production and technical area.
• Extremly user friendly software and operation through PLC.
• The machine structure made from SS 304 quality fitted with Closed Drive, Perforated Pan, Washing Sink, Inlet Air Plenum, Exhaust Air Plenum with Air tight door.
• Perforated pan with 50% opening for better quality finish.
• Excellent mixing and tumbling by special design of removable on each sloping face of the pan and anti sliding baffles provided on perforated diagonal face.
• Pan mouth closed with Stainless Steel door with a glass for process visualization.
• A stainless steel 316 sinks at bottom of pan for collection of powder with necessary stainless steel piping with tri-clover joints for ease of cleaning during the changeover.
• FLP light is provided for illumination inside the pan.
• All doors, safety guards and covers are provided with a silicon food grade seals.
• Automatic spraying system provided with Atomized spray gun, adjustable spray Gun Arms, High precise flow peristaltic pump, solution holding tank with pneumatic stirrer.
• Front entry stainless steel arm with facility to adjust the angle of spray guns is provided.
• Inlet Air and Exhaust air plenum provided with silicon seal with easy removable for cleaning.
• Inlet Air and Exhaust air flow controls through AC frequency drive of both blower.
• Exhaust air handling unit provided with wet crubber and exhuast blower. The Exhust air dust collector unit is made from MS dully painted.
• The entire Inlet air hadnler and exhaust air unit to be install in technical service area.
• Tablet discharging facility will be through the special diverter assembly
• Advance CIP/WIP system is provided for pan internal by spraying ball and outer washing by spraying nozzle both side. The complete system will operate and controls through machine PLC for washing cycle for Plain Water, Detergent, Hot Water, Distilled Water and Drying by air.
• All motor are flame proof/Explosion proof provided.
• Advance PLC control system with HMI, Colour touch screen provided of Schneider make for complete automatic coating process and batch data receipt management. Also option for SCADA connectivity with FDA 21 CFR part 11.

Additional Information:

• Production Capacity: 30" to 60"
• Delivery Time: 10 to 12 weeks